Van Kley Farm Toys - 2307 NE Bel Aire Dr. - Ankeny, IA 50021 - PH: 515-964-3548 - call to place your order
 |
Custom J & M 680/760 Gravity Wagon with fill auger - auger slips under chute gate - auger can alse be attached to side of wagon for transport - small hole has been drilled in side of wagon at the rear to attach
above pictures show the wagon filling the 16 row and 36 row planters |
|
|
 |
1/64 Custom Case 1200 - with cab and without cab - nice detail |
|
|
 |
1/64 custom bin extension for JD 9860 or 9750 combine |
|
|
 |
1/64 Custom Combines - JD 9860 wrap auger with tracks and C-IH 7010 with tracks |
|
|
 |
1/64 Custom JD 9860 combine, spacer front triples, rear duals, railings, extra long folding auger - for 16 row, 24 row or 40 ft. grain heads |
|
|
 |
1/64 Custom JD 9860 combine, spacer front duals and extra long folding auger - for 16 row or 40 ft. grain heads |
|
|
 |
1/64 Custom C-IH 8010 combine, front duals, railings, and extra long folding auger - for 16 row, 24 row, or 40 ft. grain heads |
|
|
  |
24 row head only (green or red) 16 row head only (green or red) 40 foot grain head only (green or red) 12 row head only (green or red) 30 foot grain head only (green or red) Pickup head only (green or red) 6 or 8 row head only (green or red) |
|
|
 |
1/64 custom pick up heads - picture shows green version that will fit any 9000 series combine - also have red version that will fit a 7010 or 8010 |
|
|
|
    |
1/64 Custom made machine shed for 1/64 scale farm toys - will hold approx. 15 to 20 toys 2 versions are available - both have the same dimensions listed below. Version 1 has no sliding doors on it. Version 2 has sliding doors on the end and the side. See pictures for clarification. dimensions are 12 " wide x 18-1/4 " long x 6-3/4" tall at the peak - this is equivalent to a 64' x 96' machine shed in real size roof is hinged in the middle for easy opening - has 2 doors (4-1/4" wide x 3" tall) has a wood floor with ramps for each door and white siding with black roof we have contracted with a builder to make these exclusively for us - these are available now and shipping Finally a nice machine shed for your 1/64 scale toys  version
2 with sliding doors 
 |
|
|
 |
1/64 CUSTOM Muddy JD 8530 Authentic - splattered with mud - this is a customized piece - put back in the package for shipping |
|
|
 |
JD 9860STS w/wrap auger and C-IH 7010 combine - COMBINES ONLY, NO HEADS |
|
|
  |
1/64 Custom pull type combines pictured from left to right are: JD12A, JD 30, MM, MH, AC 60, AC 72, Oliver (old style pull) and Red (IH) (JD 12A, JD30, and AC 72 are sold out) - Not all are pictured to the left. In stock to ship: MM, MH, AC 60, and Oliver |
|
|
  |
1/64 Custom New Idea pull picker - just look at the detail on this one! |
|
|
  |
1/64 Custom Houle Liquid Manure Injector - 3 axle - 7 shank (picture shows 5 shank) or 4 axle - 5 shank (bottom pictue) |
|
|
 |
1/64 grain bin roof vents - packed in bags of 4 |
|
|
 |
1/64 Custom blue 65 ft. double folding field cultivator (tractor not included, field cultivator only) |
|
|
 |
1/64 Custom 65 ft. green double folding field cultivator |
|
|
 |
1/64 custom grain vac - available in green and red only |
|
|
 |
1/64 custom 20 ft. tilt bed machinery/tractor trailer with 2 sets of dual tires |
|
|
 |
1/64 rear wheel weights (cast metal with bolt detail) - fits most tractors - use super glue to fasten on rim |
|
|
 |
1/64 custom v-rippers: (must have 3 pt. on tractor for these to mount) 9 shank with coulters - 3 pt. mount - available in green, red, or blue 7 shank with coulters - 3 pt. mount - available in green or red 5 shank with coulters - 3 pt. mount - available in green or red |
|
|
 |
1/64 - 3 pt. hitch - added to any tractor (for v-rippers above) |
|
|
 |
1/64 Saddle Tanks (yellow, silver, or white) (specify tractor to go on) |
|
|
| . | 1/64 Custom green or blue 80 ft. folding field cultivator to pull with your Big Bud 747 (only tractor big enough to pull it) (triple folds) |
|
|
  |
1/64 Custom 50 ft. NH3 Applicator - 17 shank - double foldsing applicator Bottom picture shows applicator hooked up to tractor and ammonia tank |
|
|
 |
1/64 ammonia nurse tanks - single or double - specify red or green running gear |
|
|
 |
1/64 livestock loading chutes - can be raised or lowered - red or silver only |
|
|
 |
1/64 mower - folds up - tractor not included - specify red or gold - all we have in stock |
|
|
 |
1/64 grain bin fans - small or large - very limited quantity left |
|
|
 |
1/64 drive over grain dump for semis or gravity wagons - ramps fold - red, black, or silver |
|
|
 
 |
Flatbed Chevy tandem axle truck Yellow or White Water Tanks - specify color Truck with 2 tanks on flatbed - specify yellow or white tanks Tandem axle trailer JD 4920 Sprayer
JD Flatbed Yellow or White Water Tank - specify color Flatbed with tank - specify yellow or white tanks
Head trailer (avail. in black, green, red, yellow)
Go to combine page for head pricing on 12 row and 30 ft. heads |
|
|
  |
New custom 3 pt. mount plows Top picture left to right: 8010 with 3 pt. $ 15.00 shown with 8 bottom plow for $ 40.00 for total together $ 55.00 4450 with 3 pt. & land dual $ 15.00 shown with 6 bottom plow for $ 29.00 for total together of $ 44.00 4440 with 3 pt. $ 15.00 shown with 5 bottom plow for $ 27.00 for total together of $ 42.00 4430 with 3 pt. $ 15.00 shown with 4 bottom plow for $ 25.00 for total together of $ 40.00 Bottom picture left to right: 1456 with 3 pt. & land dual $ 15.00 shown with 6 bottom plow for $ 29.00 for total together of $ 44.00 1256 with 3 pt. $ 15.00 shown with 5 bottom plow for $ 27.00 for total together of $ 42.00 756 with 3 pt. $ 15.00 shown with 4 bottom plow for $ 25.00 for total of $ 40.00
|
|
|
 |
1/64 Custom red 24 row center pivot planter with extended markers and telescoping hitch |
|
|
 |
1/64 Custom Big Square Balers with fold down bale chute (red or brown) |
|
|
 |
Hay head and longer spout for JD 7500 Self Propelled Forage Harvestor - Cut old spout off flush with machine and drill hole out with 1/8" drill bit-head just snaps on Order part #ST32 |
|
|
 |
1/64 Degelman Blades: one on the left is a 16 foot with silage guard and the one on the right is a 12 foot with silage guard (blades only) |
|
|
 |
1/64 Wagner 4WD's - Green WA-17, Yellow WA-17, Orange 14 - limited supply - |
|
|
| 1/64 V-ripper, 9 shank rear mount on draw bar (red or green) |
|
|
|
 |
1/64 Swinging Auger Kit for your gravity wagons! Auger swings out and also forward. Fits any gravity wagon. This is kit only - picture just shows how it fits on. |
|
|
 |
1/64 Tandem hitch for 2 rakes or drills (black, red, or green) |
|
|
|
|
1/64 Customized 8420, spacer rear duals, spacer FWA, yellow tanks |
|
|
| 1/64 Customized 8420, spacer rear duals, spacer FWA, 3 pt., yellow tanks |
|
||
|
|
1/64 Customized 9630 4WD with spacer duals with 3 pt. |
|
|
|
|
1/64 Customized 9630 4WD with spacer duals and yellow saddle tanks |
|
|
| 1/64 Customized 9630 4WD w/spacer duals, saddle tanks, 3 pt. |
|
||
| 1/64 Customized 9620T with 3 pt. |
|
||
| 1/64 Customized 9620T with saddle tanks |
|
||
| 1/64 Customized 9620T with saddle tanks & 3 pt. |
|
||
| 1/64 Customized C-IH STX 535 w/duals and saddle tanks (yellow, white, or silver) |
|
||
| 1/64 Customized C-IH STX 535 quad track and saddle tanks (yellow, white or silver) |
|
||
| 1/64 Customized C-IH MX 335 w/FWA & spacer rear duals, 3 pt. |
|
||
| 1/64 Customized C-IH MX 335 w/FWA & spacer rear duals, tanks (silver, white, or yellow) |
|
||
| 1/64 Customized C-IH MX 335 w/FWA & spacer rear duals, tanks (silver, white, or yellow), and 3 pt. |
|
||
| 1/64 Duals & axle for John Deere 9610 Combine |
|
||
| 1/64 Duals & axle for John Deere 9750 STS Combine |
|
||
 |
1/64 Snow blades for pickups (red, black, yellow) |
|
|
| 1/64 Pull trailer, tandem axle, for combines or sprayers - black |
|
|
|
 |
1/64 Fifth wheel pull trailer, tandem axle for combines, black |
|
|
